Seiko Westminster - Whittington Chime movement owners instructions

1 - Hands setting disk

2 - Night time silencer

3 - Chime melody switch

4 - Volume control disk

Every time the chime - melody selector switch (3) is shifted, the corresponding chime will start to ring.  You may adjust the chime volume by turning the volume control disk (4) toward max for louder or toward the "min" position for a softer level.

Every time the chime selector switch is moved, the corresponding chime will start to ring. Select the chime you wish to hear. The left position is Westminster and the right is Whittington.
 

The Night Time Silencer switch has 3 positions.
If you wish for the chime to play 24 hours, keep it in the left position.
 

If you wish for the chime to shutoff automatically every night at 11:00 PM and come back on at 5:45 AM, please proceed as follows:

a) set your clock to the current correct time if you have not already done so.
b) if the current time is during the AM hours, slide switch (2) to the middle position marked "AM"
c) if the current time is during the PM hours, slide switch (2) to the right position marked "PM"

The clock will now be silent by shutting off automatically every night at 11:00 PM and come back on at 5:45 AM. The shutoff period cannot be changed.

a) Move the pendulum hanger to the right to release it.  It will "pop" out of the shipping position.

b) Attach the pendulum to the hanger as shown.

c) After hanging the clock, give the pendulum a gentle push to start it swinging or slightly move the bottom of the case from left to right to start the swinging motion.